How to maintain the stapling machine

While paying attention to the correct use of the nail box machine, pay attention to the correct maintenance of the machine, which is the key link to improve production efficiency and nail box quality, and cannot be ignored. Therefore, it is required to lubricate the bookings and punches on the machine once a day; The fixed shaft of the header and the fixed shaft of the left and right baffles should also be lubricated and cleaned with oil at any time; The upper and lower nail head drive shafts, bolt groove shafts and drive screws should also be well lubricated; The lower binding head is easy to accumulate in the punch due to part of the electroplating scraps falling off when the flat wire is sent in, so it should be cleaned frequently at ordinary times; After each month, open the header for cleaning and oiling; The 3 gears of the left and right baffles of the bolt slot shaft of the paper feeding belt should be greased once a month; Clutch and brake shall prevent oil and water from entering and infiltrating; The servo motor shall be kept clean to avoid dust accumulation; Clean the cooling dust filter screen of the servo motor driver frequently; The electrical control box must be kept clean to prevent short circuit fault caused by dust accumulation; The internal and external wire feeding wheel axles shall be lubricated with grease to keep them reliable and flexible; The gear and chain of power transmission shall be lubricated with grease once a month to prevent wear of mechanical parts